Shell Omala S4 WE 320
Shell Omala S4 WE 320 main applications:
- Enclosed industrial worm gear systems
- Extended life systems
- Other applications
Shell Omala S4 WE 320 is an advanced synthetic heavy duty industrial worm drive gear oil formulated using specially selected polyalkylene glycol base fluids and additives. It offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting.
Main Applications, Features and Benefits
Specifications, Approvals & Recommendations
Typical Characteristics
Performance, Features & Benefits of Shell Omala S4 WE 320
+ Long oil life - maintenance saving
Shell Omala S4 WE 320 is formulated to provide excellent oxidation and thermal stability, extending lubricant life and resisting the formation of harmful oxidation products at high operating temperatures. This helps maintain system cleanliness over extended maintenance intervals. Shell Omala S4 WE 320 offers the potential to extend service intervals significantly compared to conventional industrial gear oils.
+ Excellent wear protection
Shell Omala S4 WE 320 is formulated to have excellent load carrying capacity providing long component life even under shock loading conditions. It also has a high resistance to micro-pitting. These features provide benefits over mineral oil-based products in terms of gear and bearing component life.
+ Maintaining system efficiency"
Shell Omala S4 WE 320 offers improved energy efficiency and lower operating temperatures in worm gear applications. Rig testing has shown efficiency improvements of up to 15% in comparison with mineral oil-based products and 11% over other synthetic hydrocarbon-based lubricants. These results have been confirmed by OEM testing and field experience.
Compatibility & Miscibility
Seal & Paint Compatibility
Seal & Paint Compatibility High-quality epoxy paints are recommended, as polyalkylene glycols will tend to attack certain conventional paints. Shell Omala S4 WE 320 has been found to be satisfactory with nitrile and Viton seal materials, although Viton seals are preferred.
Change-over Procedure
Shell Omala S4 WE 320 contains polyalkylene glycols and is not compatible with mineral oils or most other synthetic lubricant types. Care should be taken when changing from such products to Shell Omala S4 WE 320. The system should be flushed with the minimum quantity of Shell Omala S4 WE 320, operating under no load and draining whilst warm. Ideally, seals exposed to mineral oils should also be replaced. Inspect the lubricant after a few days use. Ensure that oil systems are clean and free from contamination. Shell Omala S4 WE 320 is also not miscible with some other polyalkylene glycols, so caution is needed when topping-up. Generally, the preference is to avoid mixtures by draining and refilling.
